Search

CFD News/Conferences/Competitions update

Updates

ASME / FEDSM 2012 is now open: Submit abstracts

More details can be found at http://www.asmeconferences.org/FEDSM2012/

Friday, September 16, 2011

Conference presentations from ILASS Europe

The 24th European conference on liquid atomization and spray systems took place from Sep 5-7 2011 in portugal.

Site link: http://www.ilass2011.org/programme.asp

Very nice papers were presented and interestingly enough, all the papers have been made public, downloadable and usable. Great!

Topics of interest include: numerical simulation of jets, sprays, heat transfer, phase change and experiments on the spray systems. I follow both ILASS and ICLASS conference with great interest. Some of the papers easily make it into Atomization and sprays Journal!

For someone interested in engine modeling (combustion, sprays, engine design etc), this is a perfect place to be associated with.

The conference is very good and provides nice collaborative atmosphere. And more importantly dont forget, for young researchers from universities, it is possible to get fund for traveling to the conference

Take a look here: http://www.ilass2011.org/travel_awards.asp and make use of this. All you need to do is send Resume and apply!

ofcourse, you can browse previous ILASS Europe conference presentations and download them single or completely (zipped files) from http://www.ilasseurope.org/ILASSconfs.html

I have some more material to share on spray and other Multiphase modeling items which I will post as soon as possible.


If you have any related publication material for showcase, please comment on the blog and post link to your research site, thesis or publication link.

Sunday, June 26, 2011

OpenFoam: Developments and Resources...

Time and again, new developments in the form of updates, conferences on openfoam providing CFD-users, modelers, validation specialists with enriching experience takes place and I am once again thrilled to follow up on them.

Recently, openfoam workshop 2011 was held in Penn State Univ, USA. www.openfoamworkshop.org

Within the site, they uploaded a blog posted by a workshop attendee is available. I am re-pasting it here for our users

http://www.ebb.org/bkuhn/blog/2011/06/20/new-again.html

OpenFoam workshop presentation abstracts and some slides are available for each day here

http://www.openfoamworkshop.org/6th_OpenFOAM_Workshop_2011/Program/Program.htm

(Click date and then progress into the day program and click/download abstracts, slides etc). Nice presentations on meshing, multizone multiphysics solvers, combustion etc.

Again, what I really like again and again, ...ITS ALL FREE to download, review, discuss and use !! What an amazing thing for the international community.

For example: the document from OF workshop,

http://www.personal.psu.edu/dab143/OFW6/Training/churchfield_slides.pdf

nicely presents tools and modeling procedure in OF pertaining to Atmospheric boundary layer problems..Clearly indicates how to create input files, what to append, solvers to use and what to expect etc...well done !

I came across this site for OpenFoam users in FINLAND - But I am sure everyone can gain something from it - http://openfoamfoorumi.com/

Recently, openFoam developer Dr.Jasak, made a presentation on the recent / current development work in OF on the Dutch OpenFoam Day in TU Delft, Netherlands. Document is available here

http://home.tudelft.nl/fileadmin/UD/MenC/Support/Internet/TU_Website/TU_Delft_portal/Onderzoek/Kenniscentra/Delft_Research_Centres/Computational_Science/Events/Seminars/previous/doc/Hrvoje_1.pdf

The document shows nice plan /developmental activities for Shape optimization, turbomachinery, wall film modeling, meshing upgrades and grid technology with OpenFoam.

Another nice blog by a OF user with tricks/tips in OF: http://blogs.fau.de/zeiser/category/software/openfoam/


Some more forum discussions other than in cfd-online on OF here: http://engits.eu/vanilla/index.php?p=/discussion/53/how-to-genererate-an-openfoam-baffle-internal-face/p1


I have found several more documents that OF users posted in their own blogs and will try to connect our CFD blog with others'

Keep flowing !

Thursday, May 19, 2011

Porous media flows

One of the foremost challenging topics that has found wide applicability deals with the flow in porous media. The topic has been, time and again, researched with great interest. I have done my share of flow simulations involving porous media and, uptodate, havent figured out "one particular" global model that can be used in a universal manner. It is understandable to assume that every single porous media flow is different and the complexities associated with the interactions within the systems are not easily resolved..Still, to me, using different models for different systems and not able to combine them all together indicates that the fundamental research in this area needs serious revision.

Information on multi scale modelling in porous media can be obtained here http://www.porous-media.org/

A nice handout on porous media here: http://www.columbia.edu/~rl268/ChESite/E3110/Handout_15.pdf

Texas A&M has a nice list of publication reports involving different simulation analysis.

http://www.isc.tamu.edu/publications-reports/tr

Bad that they did not name files easy to open and read as per need. Sample file on porous media: http://isc.tamu.edu/publications-reports/tr/9706.pdf

Another nice website with several papers/documents/files on porous media flows can be found here: http://www.win.tue.nl/macsi-net/Events/

One of Prof. Joseph's page with several papers on cavitation and fundamental fluid dynamics, also has some papers on porous media
(see http://www.aem.umn.edu/people/faculty/joseph/papers/) - the paper is modeling foamy flow in porous media (http://www.aem.umn.edu/people/faculty/joseph/papers/foamyOils3.pdf)

a nice paper for definite reference and further research http://library.wrds.uwyo.edu/wrp/85-37/85-37.pdf

Several softwares are now adept in carrying out flows through porous mediums. ANSYS,STAR,Flow3D,FIRE,openFoam(:),Polyflow(?) - all have a variety of models in-built. Again, directions of usage is based on particular application where the terms involved in the transport equations will be treated appropriately. Based on my experience in coding porous flows, fundamental changes (the GUI in softwares) let you do is to adjust the pressure gradient (based on some interactions) and the drag coefficients. As written in my earlier blog, drag coefficients play a pivotal role in producing excellent convergence and stability rates owing to the nature of the set up of the solution matrix.

A sample FLOW3D movie (Finite Volume method) - Read Flow3D paper on flow through unsaturated porous media here: http://www.flow3d.com/pdfs/tn/FloSci-TN25R.pdf

Youtube video: http://www.youtube.com/watch?v=jszmSsF2gDI

Get more flow3D based runs here: http://wn.com/Modeling_Porous_Media_with_FLOW-3D

Doing porous media flows using Lattice boltzmann !!

http://www.youtube.com/watch?v=F7j8C5-m430&feature=related


I found the following site - http://www.engr.ucr.edu/~vafai/Publications/ very useful. They have a long list of papers on heat and mass transfer with a lot of publications/book chapters on porous media flows.

Modeling and simulating your own porous media flow is now possible - thanks to openFoam !! A sample modeling capability detail is presented here

http://www.tfd.chalmers.se/~hani/kurser/OS_CFD_2008/HaukurElvarHafsteinsson/haukurReport.pdf


I followed this researcher : http://www.ifd.mavt.ethz.ch/people/hajibeygi/index with some nice information in the site.

There are loads of papers on multiphase flow modeling in Heterogenous porous media, porous medium flows with fractional distillations, fractured media - with and without turbulence - how complicated can these get??

Tuesday, May 17, 2011

More on Testing / Validation / Verification

Once the modeling and implementation part is worked out, the most critical and important phase of the code development stares at us. Yes, you guessed it right. The validation part !!

Most often, what is coded in the software (on a theoretical basis) involving detailed physical approximations of a global phenomenon is directly tested against well known "experiments" and "test cases". During the testing (which is pretty much making sure code does what it is supposed to) and later, the validation (where the model is supposed to mimic a process) process, the developer/coder realizes that more approximations or model adjustments is necessary to satisfy the user!!

Stability, convergence, accuracy are all dealt with in the validation process. If the code is made to work on a variety of test cases and the coder, who is the best critique of his own work, tries to break the code by providing a wide range of operating parameters. With every input, the developer monitors the behavior of the code - as to what happens when the code confronts certain aspects of numerical deficiencies or challenges based on the input defined.

Every test case is unique in the sense that it offers a completely new perspective of the modeling process - what the model lacks and what additional effects needs to be incorporated etc. It is not an easy process. No way. However, as a rule of thumb, modelers start by applying the code to smaller domains and escalate the size and complexity of the process as they move into advanced testing/validation process.

For example, once you have developed a "boiling model" - it makes no sense to directly apply it into a large scale channel flows with high complexity when no tests have been run on smaller channels/ducts and compared with experiments. Sometimes, in fact many times should I say, going across different scales and applying the codes, one figures out that some "problems" are often masked by other parameters operating in the system. Only by running the procedure on a wide range of scenarios can one explicitly make sure all modeling constraints act as per plan and their interactions are stable.


A small discussion is available here: http://www.innovative-cfd.com/cfd-validation.html

This site shares some well known validation resources

NPARC Alliance CFD Verification and Validation Web Site: http://www.grc.nasa.gov/WWW/wind/valid/homepage.html

AIAA CFD Drag Prediction Workshop: http://aaac.larc.nasa.gov/tsab/cfdlarc/aiaa-dpw/

CFL3D Test/Validation Cases: http://cfl3d.larc.nasa.gov/Cfl3dv6/cfl3dv6_testcases.html


Sample validation/testing (exp) study links

1. CFD model validation for hydrogen dispersion: Nice study - http://www.gexcon.com/doc//PDF%20files/Middha_Hansen_Storvilk_HydrogenDispersion_09.pdf

2. Stirred vessel mixing test case study released by ANSYS: http://www.bakker.org/cfm/publications/tn253.pdf

3. Often wind tunnel experiments and studies form a large portion of the CFD testing and validation database: I came across one of these sites
Link
http://ftp.rta.nato.int/public//PubFulltext/RTO/TR/RTO-TR-027///$TR-027-02.pdf


4. How about a CFD evaluation study of wind tunnel flow quality itself !!?

http://sts.bwk.tue.nl/UrbanPhysics/CFD_windtunnel.htm

5. one of the openfoam based WIKI has a site for multiphase activities: http://openfoamwiki.net/index.php/Sig_Multiphase

6. I am no supporter of any particular book / reference..recently had a chance to look at this book ("Validation of Advanced Computational Methods for Multiphase Flow", C2005). It was a nice collection of the test cases (fairly well known to most of us)

http://www.begellhouse.com/books/709c03c830e1b733

I found this article sometime ago on the "general BEST practices guide for numerical accuracy"

http://www.kxcad.net/ansys/ANSYS_CFX/help/help/Reference/CDDDFGCH.html



Coding and implementation is one part of the puzzle. Without validation and testing, no software package is complete. (No wonder so many job availability for validation and testing are on the rise !! Customers want to see more validation reports / testing reports before they award any contract to potential CFD consulting services or the big players)

Make sure whatever you code -----> is properly validated.

Friday, May 6, 2011

CFD's new frontier: OpenFoam

I recently came across this site http://www.cfse.ch/cfse/site/openfoam.php which uses openFoam for several multiphase applications such as free surface VOF modeling of flows around Motor yacht, hydrodynamica analysis of submerged propeller and several other interesting items.

Safe enough to say, the OF users count has swelled quite dramatically over the years. From the interactions I have had with researchers, a lot of them are quite satisfied with the already existing modules (REMEMBER - FREE TO USE) available from OpenFoam installation. Guess what, with every new release the developers keep adding new "foam modules" in every section combustion, multiphase, incompressible/compressible etc..have you checked out the latest release.

I was not quite following the latest release and when I did, I was quite amazed by the amount of additional features OF has incorporated and again "FREE TO USE AND DEVELOP" !!!

Now, several organizations (sometimes I provide consultations) have now resorted to the use of OPENFOAM as their primary investigation tool - giving the clients, specific developmental modules as deliverables. For example, recently I modeled evaporative boiling in cooling water jackets for automotive boiling flow applications and provided source codes as a deliverable. All the client had to do was take this, place it in their directory and compile it.

They built their own manual - indicating what properties has to be varies inclusive of constants and "fudge factors" which we often provide to take into account the dynamics in such multiphase calculations.

Now big interactive GUIs, no fancy JAVA interfaces, simply editing of the file using a word editor - notepad, VIM (linux) and guess what they have modified the "run" file. What an ease !


Some boiling flow simulations using openFoam with VOF with numerical modeling issues is available here for discussion

http://www.csi.tu-darmstadt.de/media/csi/news_1/dbdopenfoamworkshop/kunkelmann_20090407_csi_openfoam_workshop_kunkelmann.pdf



Take a look at a recent plan, http://virtual.vtt.fi/virtual/safir2010/vasenpalkki/finalseminar/Presentations/Thursday/Area_4/NuFoam_SAFIR2010.pdf

that one of the institutes has for Foam two phase solver development. Simply terrific potential they see in this source codes.

Article by Jasak (Foam developer) on the opensource CFD in industry and research is a nice article i suggest reading

http://210.98.5.85/index.php/jnaoe/article/viewFile/24/pdf2-5

with so much wealth and abundancy of information in the web on openfoam - I wonder where is this heading ?? Will ANSYS try "purchasing" openfoam code release and development to retain its monopoly !!>>

Monday, March 28, 2011

OpenFoam news and update

The openFoam community is growing much faster than anticipated and researchers are pouring in to implement new models, new methods within the openFoam framework for obtaining research specific results.

Good thing is ...the models generated by a researcher in openFoam can be tracked, understood and bettered by another modeler ..Thanks to the universal template.

Recent updates from the openFOAM world can be obtained from

http://www.openfoam.com/news/


One of the new entries into the OF family is the PIMPLE (PISO/SIMPLE merged version)..Not really a new concept though ..take a look at some old publications


http://cat.inist.fr/?aModele=afficheN&cpsidt=2138118
.

Some commercial codes like AVL FIRE and others (i cant seem to recollect) - already have similar implementations - combining PISO/SIMPLE etc - working very well for them. FIRE has a two stage pressure correction method which they robustly use for engine applications (did some research on that ..gives more robust results and very stable)..


Some publications based on this PIMPLE have already started to appear on the recent conferences such as this paper:


1. http://web.univ-ubs.fr/limatb/EG2M/Disc_Seminaire/ECCOMAS-CFD2010/papers/01454.pdf


2. A nice article on PIMPLE based solidification modeling using OPENFOAM. The article has nice details of the implementation part. Download it from the link below

http://dutchopenfoamusers.nl/downloads/Eelco1.pdf


3. Different mesh motion alternatives and related implementation has been reported in a article below

http://www.tfd.chalmers.se/~hani/kurser/OS_CFD_2009/AndreuOliverGonzalez/ProjectReport_Corrected.pdf

The above link has some nice (very nice :)) descriptions of equations on how to implement mesh motion in OF...I certainly loved going over these details ..although most of them are familiar to all of us, little re-read is always helpful.

Also, you can browse, read and download all papers of ECCOMAS 2010, which has lots of OF related papers, from

http://web.univ-ubs.fr/limatb/EG2M/Disc_Seminaire/ECCOMAS-CFD2010/papers/

Wednesday, January 26, 2011

Paper & Publications from Conferences

In a recent post, a fellow CFD user posted the following link to a set of CFD papers presented at the 10th International congress of fluid dynamics in Egypt (16-19 Dec, 2010).

Conference topics included:

1. Aeroacoustics.
2. Aero-elasticity Applications.
3. Air Conditioning Applications.
4 Applied Aerodynamics.
5. Computational Fluid Dynamics.
6. Experimental Fluid Dynamics.
7. Flow Control and Diagnostics.
8. Flow-Induced Vibration.
9. Fluid Mechanics Applications in Bioengineering.
10. Heat Transfer and Fluid Mechanics.
11. High-Speed Flow.
12. Mechatronics Applications.
13. MEMS and Microfluidics Applications.
14. Multiphase and Reacting Flows.
15. Nano Applications.
16. Propulsion.
17. Turbomachinery.

The papers can be downloaded from

http://www.icfdpegypt.org/abs_temp.html



Also, interestingly long time back, I came across the australian CSIRO site (http://www.cfd.com.au) where you can download several conference proceedings involving several CFD applications, methods etc

For ex: Get all conference proceedings papers from the

"
The 1st International Conference on CFD in the Mineral & Metal Processing and Power Generation Industries"

from
http://www.cfd.com.au/cfd_conf97/index.html

Some of the papers are really good and gives lots of prospects for future research in CFD. They have all the papers from conferences starting 1997 till 2009 (so far).

CFD Online / FLUENT Discussions